Posts Tagged ‘Berea

18
Feb
09

When Woodworkers Get Together

I recently had a recording opportunity with Rick Waters and Erik Pearson; names that sound remarkably like the co-hosts of The Sawdust Chronicles podcast (I really wish I would have thought of that name!)  The experience was a great one — I had the pleasure of describing my “rustic” shop (that’s what they call it in the country, a city-dwelling friend of mine would have described it as a “ghetto-shop.”)  I was given permission to vent my spleen on Galootdom, and helped Rick discover the joys of making a Stanley No-7 usable.  The experience reminded me of somewhere I’ve been before…hmm… Oh, Yeah!  Berea, Kentucky – the Woodworking in America conference.

There just isn’t any doubt; woodworkers as a group are the nicest, most supportive group – as a group – that I’m aware of.  And the funniest — laughter is inevitable.  I’m convinced that Star Trek:TNG got their idea of the Borg from woodworkers (“You cannot resist.  You WILL be assimilated.”)  Beats the heck out of school; “You WILL be marginalized.”

Every Friday my junior high school held lunchtime “dances”; where a about 200 acne-infested, geeky boys whose greatest talent lay in tripping over their own feet would sit on one side of the gym and the girls whose teeth looked like they had emptied out the nearest Ace Hardware sat on the other with the juke box playing, “It Never Rains in California” (that would be the original Albert Hammond version, if you need the context).  One might get similar imagery for getting woodworkers together — I have no hard data to prove this, but I would think that a higher percentile of woodworkers compared with the general population would tend to be introverted because much of the work is done holed up in our shops, working alone — only with coffee and doughnuts rather than Reese’s and Twizzlers.

Nope.

Again I remain impressed at the collegiality, warmth, and sense of comradery from these two guys whom I count as friends!  Where else can you go and forget about social strata, politics, and other anthropological detritus?  Not even the Church practices such liberty!

Thanks, guys, for such a great time!  I’m sorry the tree that came down and cut the power to all of the little town I dwell in had to end things abruptly, and I’m looking forward to a return visit!

Why don’t we do this stuff more often?

You can find The Sawdust Chronicles on iTunes or wherever quality woodworking podcasts are sold near you.

Advertisements
23
Jan
09

Episode 11 – Hand Planes, Part 1

A luthier's finger plane, NOT for planing your fingers...

Luthier's finger plane (NOT for planing fingers)

I have bad news for you. Although he was a brilliant inventor, Leonard Bailey was NOT the Messiah! What he did do was advance the art of plane manufacturing, combining efficient manufacturing, good design, and good business acumen (selling his patent rights to Stanley Rule & Level Co.) Later on, he didn’t do so well because he chose to compete against the very folks (the tool giant) he sold out to. Sometimes you get the chicken, sometimes you get the feathers. Nonetheless, hand planes have certainly felt his influence.

tools-019

A sexy Stanley No.-4 from the WWII era.

This is the episode we begin to look at a huge subject, that of hand planes. Planes seem to have stirred the greatest interest of tool collectors for long enough that volumes of valuable information on history, manufacture, anomolies, and how to type many of the recognizable – and some a bit more arcane – is all readily available with a minimum expenditure of effort. As I researched information for this and the next podcast, I became increasinly impressed with the ingenuity of the Galoot; if something isn’t available, the Galoot made it. Sometimes that meant relying on the blacksmith, but it seems that, especially prior to the Civil War, that the Galoot would be so inclined to spend his own time with hammer and forge. The Bailey pattern plane, no matter what marque it bears, is the story of the Industrial Revolution and the shift away from widespread wooden plane use. We can almost track history; I offer exhibit B, a type-17 Stanley No.-4 smoothing plane with funky red-stuff handle that was painted black and the relatively tiny depth adjusting nut is made out of hard, black, rubber (recycled Jeep tires?) rather than the customary brass. This one here has become my po-boy scrub plane, which doesn’t work out real well because it still remembers it was made to be a smoother.

tools-022

My Stanley 60-1/2 with racing stripes.

It’s very important to have a really good block plane, and I have one in my 60-1/2. I like it because its a stealth conversion; someone with brilliant forethought concluded that if he (or she) added the gold metalflake paint to this plane that made his (or her) AMC Gremlin model look so cool, then that would absolutely punch holes in its value (the plane’s, not the Gremlin’s) and some struggling Galoot down the road would be able to get full functionality at a discounted price. I know that there is a God because that someone with brilliant foresight was NOT me (anyone who knows me can testify to that) and that I’ve never owned either a Gremlin or a Gremlin model. I can do better than that, actually, because one of my girlfriend’s father had given her an orange Pacer stationwagon. Everybody said, “Oh, God!” as we drove past.

tools-037

A cleverly conservative execution of a fantastic plane kit!

I will soon be blogging about my really cool Christmas present, but now is a great time for a sneak preview. My parents had obviously been peeking at Santa’s “nice” list (now just hold on a minute!) Anyway, under the synthetic, non-allergenic, non-asthma-attack-inducing genuine Canadian Pine fake Christmas tree there lay a package containing a plane kit from Ron Hock. Now, I’m one who loves to use wooden planes, but they always have been Other People’s Planes (OPP.) Now I have the chance to use one of my own, WOO-HOO! As soon as it’s finished, of course. It’s so much cooler for me now since Woodworking In America 2008, as I had the chance to meet Ron Hock himself, and sho’nuff, he’s one of us! In the podcast I make note of the fact that, like chisels, wooden planes are used in conjuction with mallets (for adjusting the plane, of course!) Here’s my set-up.

For Further Reading

Here are a few very important links for you to book mark for further study, illumination, and reference:

Patrick Leach, one of the original OldTools Listerv masterminds where he was (is) known by (among other things) the moniker, “The Merchant of Ashby,” is one of my primary dispensers of vintage Stanley iron and consequently one of the reasons I work. He has compiled a world-famous (world-wide-web famous?) cross between a subversive treatise, a hortatory sermon, and an old-time SNL feature on Stanley metallic planes known universally as Patrick’s Blood & Gore, and found here: Patrick’s Blood & Gore.

Yet another fellow Galoot, Jay Sutherland (who does not have nearly as many weird and humorous monikers as Patrick,) assembled a page in the 1990’s that breaks down the Stanley plane type study very clearly. Doing a type study on a given plane is fundamental to understanding an individual plane’s collector value (if you do that collecting sort of nonsense. I don’t.) You can find Jay’s excellent resource here: The Stanley Bench Plane Dating Page.

Patrick’s B & G, revised and illustrated by listmom Ralph Brendler and Allen Fisher here: Revised B & G

If you’re in the market for vintage Stanley baubles, I would highly recommend avoiding the eBay route where quality control can be “iffy” (yes, I know, eBay will make them play nice, etc.) I am militant in my belief regarding helping my friends prosper, so I will always recommend two Galoots I’ve had personal dealings with over the years, and have always been treated a lot better than just fairly. Patrick Leach, as already mentioned, is one, and Sandy Moss is the other (Sandy’s Tools-For-Sale page is here: Sandys Tools.) And just for the record, I’m not getting paid for this by either of these gents.

That’s it for part 1… here’s the podcast. Come back for more fun in part 2!

04
Jan
09

Episode 9 – Layout and Marking

On Layout & Marking Tools

Layout and Marking tools, while not as glamorous as infill planes, for example, are essential to Galootdom. Episode 9 of the now classic “Way of the Galoot” explores the various tools for laying out and marking that need to lurk in the Galoot’s tool chest drawers.

Rabone no-1190

Folding rule

At the right is  one of my folding rules, a crispy Rabone with a built-in protractor and level (just how cool is that?)

Superior Works marking knife

And at the left is my Superior Works cocobolo handle (www.supertool.com).  This knife is made by Patrick Leach, old tool monger (and now new old tool monger,)  Stanley plane expert, and author of the famous “Patrick’s Blood and Gore.”

tools-004

At the right is a Stanley sliding bevel gauge.  Note the clever use of staining fluid on the benchtop; this is done for the same reason that we tattoo horses’ gums…

Trammels

Trammel points

And a groovy set of trammel points.  I’d be afraid to use these, knowing my own work habits.

As always, this is but a mere surface scratching (pun intended) as to the availability of good marking tools.  I promise you that the tools pictured here are far superior to crayons…

And as always, here is the podcast:

Video thumbnail. Click to play

24
Dec
08

Episode 7 – Chisels

On Chisels

This week we take a brief survey of the various types of chisels available to the Galoot, and what they are used for. If you are anything like me, a good tool is a thing that brings joy, and a really good chisel is just one of those things that can make you dance a little jig. Or something.

Mortise Chisels

Set of LN mortise chisels

At the right is a photo of Lie-Nielsen’s very fine mortise chisels, on the pattern that has evolved since Moxon’s time. These are many knowledgable Galoot’s “go to” mortising chisels, and rightly so. Notice the socketed handles.

Different Mortise Chisels

English Pattern Mortise Chisel

At left is, among other things, is one of Ray Iles very fine English Pattern mortise chisel, imported by Gramercy Tools. Note the robust construction and unusually thick handle. The 4″ square will help you with some perspective. See below for links to Gramercy Tools.

Eye-Candy Bevel Edge Chisels

Blue Spruce bevel-edged chisels

Blue Spruce Tools makes some bevel-edged chisels that look like they should be museum pieces rather than ordinary bevel-edged chisels, in fact the term “ordinary” and “bevel-edged” chisels don’t belong in the same reference to these beautiful tools. It’s tools like those shown on this page that makes woodworking a spiritual exercise! All these tools (and more!) are discussed in the podcast.

Firmer Chisels

Sorby "Registered" Firmer Chisel

At the left is a Sorby “Registered” firmer chisel. Note the robust construction, but not nearly as beefy as the mortise chisels above. This chisel will hold an edge well, and withstand more raps from a mallet that I care to give it.

Finding chisels made with excellence, in no particular order:

Blue Spruce Chisels

Gramercy Tools

Lie-Nielsen

These are just a few, by the way. Fortunately, new old tools have never been more available or of higher quality than at present! By the way, the photos above were shamelessly snarfed from the tool maker’s respective web sites. Visit them!

[blip.tv ?posts_id=1615943&dest=-1]

19
Nov
08

WIA Wrap-up… Not Yet!!

I lived in Jessamine County, Kentucky, a mere hour from Berea, Kentucky for 6 years (whatever town in Kentucky you are in, to sound local you need to add the word “Kentucky” after it.  Practice with me now: Berea, Kentucky.  Good!)  Each of those 6 years, spring and fall, I experienced sinus infections.  I presume the spring sinuses were based on allergies from pollen flying around, and I expect the fall ones were caused by leaf mold.

It’s fall.  We were in Kentucky.  I have so much I want to talk about with you guys, but I can’t because I sound like I’m under water.  Just be patient… in a couple of days I’ll have some more great content from Berea to offer you that are nostalgic already, and my perspective for those of you that were unable to make it.  In the mean time, I wish you all thin, wispy shavings!!




RSS Follow me on Twitter

  • An error has occurred; the feed is probably down. Try again later.

Proud Member

RSS Matt’s Basement Workshop

  • An error has occurred; the feed is probably down. Try again later.

RSS The Renaissance Woodworker

  • An error has occurred; the feed is probably down. Try again later.

RSS The Woodworker’s Resource

  • An error has occurred; the feed is probably down. Try again later.

RSS Folding Rule Blog

RSS Kaleo’s Workshop

  • An error has occurred; the feed is probably down. Try again later.

RSS Lost Art Press

  • An error has occurred; the feed is probably down. Try again later.

RSS Adam Cherubini

  • An error has occurred; the feed is probably down. Try again later.

RSS Philsville